Gingerbread Fudge Recipe - A New Christmas Classic (2024)

FAQs

What is the secret to good fudge? ›

Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.

Immediately stir the fudge with the wooden spoon or beat on low speed with an electric mixer. The mixture should seem runny at first. Continue to stir vigorously or beat on low speed until the mixture begins to thicken slightly and loses some of its shine, 18 to 22 minutes.

Desired texture

It should hold together well without being too hard and, above all, has to be melty and silky in your mouth. It's the size of sugar crystals that makes the knees of fudge lovers buckle…the smaller the crystals, the less they are perceived on the tongue and the more the fudge tastes smooth and creamy.

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

So, the key to smooth yet firm fudge, pralines, and fondant is to first bring the mixture to a high enough concentration and then let it cool off somewhat before starting to stir. And once you do start to stir, stir fanatically and without stopping for the finest, creamiest texture.

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.

Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.

Use a wooden spoon because wood is a poor conductor of heat and the handle will stay comfortably cool while you're working with the hot candy. Remember that beating doesn't harden the fudge (this occurs during cooling); beating begins the process of crystallization.

What happens if you stir fudge too early? ›

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

Without stirring or agitating the pot, allow the fudge to cool to 130°F (54°C)—or even lower! Harold McGee says that “candy texture is affected by the syrup temperature at which crystallization begins,” and this is the temperature where the seeds can form correctly.

According to most recipes, the ingredients of fudge are cooked to what is termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.